INPA K+CAN USB Interface for BMW Inpa K+CAN OBD Diagnostic Cable INPA K+CAN usb interface Inpa obd Diagnostic Cable for BMW Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 all functions as in OMNITEC interface. This means you need to install the CANUSB with D2XX drivers and download the CANUSB.

where to download and how to install… Here you go.

Standard for BMW protocol (for BMW OBD interface). D-CAN for: E60, E61 od 03/2007 E83 od 09/2006 E81, E87 od 03/2007 E90, E91, E92, E93 od 03/2007 E70 (new model X5) R56 (new model MINI) PT-CAN, K-CAN - fully switchable speed of migistral CAN - out can diagnose driver without any car Protocol 'for BMW OBD interface' for older cars. The BMW D-CAN OBD2 USB Cable is a must-have tool for any BMW E-series enthusiast. Paired with the included BMW Tools software package, it allows full diagnostics and coding for a wide range of BMW models from 2008-2016. See the list of supported models below. The simple installation package takes care of most of the configuration required to start and makes it easy for beginners to start. Mar 23, 2016 This is a DIY solution from a K+DCAN user, who succeeds in setup Standard Tools 2.12 on Windows 10 x64 (64-bit.) that is never qualified by the BMW Group and is considered an experimental platform. Tools tested with: Windows 10 64-bit Home. K+DCAN cable from China (Warning for bad K+DCAN cable!!!). INPA BMW Software is for BMW diagnostic & coding software, INPA BMW Software work with INPA/Ediabas K+DCAN USB Interface professional performance than OBD2 Scanners, support BMW E-Chassis vehicles from 1998 to 2008. Here VXDAS.com share all about INPA BMW software & INPA K+DCAN hardware as follow.

NOTE: I am NOT responsible for any damage YOU do to your car or computer.BMW INPAwill work with few select things for an E38 such as resetting adaptations, diagnostics, code reading, etc. NCS Expert will NOT run on a 64-bit operating syetm. If you have a 32-bit version of Windows 10, please feel free to try ECS Expert and let me know if it works!

I have NOT tried INPA with any other bmw models. Please feel free to comment your success on other models!!

BMW INPA Windows 10 download links:

K+DCAN usb cable:

Switch mode K+DCAN cable:
http://www.cardiagtool.co.uk/bmw-inpa-k-can-with-ft232rq-chip.html
INPA software 5.0.2:
https://www.dropbox.com/s/wvgykv0zg2scju9/INPA.rar?dl=0

INPA cable software:

Please allow time for these downloads. They are fairly good sized.

How to setupINPA 5.0.2 on Windows 10 64bit:
Should you get ANY errors or pop-ups during any phase of the installation, ignore them. INPA will still install.

Pre-Installation
1.Download all required files and programs,as listed below. Also you should have the K+DCAN cable in your posession(link provided below).
2.Extract the INPA.rar to your desktop. You will be left with INPA folder.
3.Extract INPAcable.rar to your desktop. You will be left with INPA cable folder.

Installation – Phase 1
1.Open INPA cable folder and move the top four folders (step1, step2, step3 and driver) to Windows(Cfolder of your PC.
2.Whilst in Windows(C, open 01_Step1 folder and copy EC-APPS over to your Windows(Cdrive.
3.Go back to 01_Step1 folder and open the NFS folder. Open Entpackt folder. Open disk 1, find SETUP.exe and right-click it. Goto Properties/Compatibility and set it to run in compatibilty mode for Windows XP (Service Pack 3). Also, check the box for Run as Administrator. Hit Apply then Ok.
4.Double-click SETUP.exe to launch.
5. Once window pops up, select Windows XP. Click Weiter (it means Next).
6.Click Weiter 3 more times. Make sure User Mode is selected. Click weiter.
7.Make sure top choice is selected (1 Parametri……). Click Weiter.
8.Ensure OBD is selected. Press weiter. Ensure Kein API-TRACE. Click weiter. Ensure Kein IFH-TRACE is selected. Click weiter.Ensure Komfort(.IPO) is selected. Press weiter.
9.Press OK. Let install. Press ok, and again. Press any key to continue.
10.Select Ja,Computer jetzt neu starten. Click Breeden. This will restart your PC as needed.

Google Meet is an official app from Google that lets you hold video conferences with up to thirty people simultaneously. Skygofree real download for android phone. All you have to do is organize an event in the calendar app and send the invitation to the rest of the participants.One of the great things about Google Meet is its convenience and its perfect integration with your calendar app.

Phase 2
1.Goto Windows(C/02_Step_2/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select Enlgish then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Check off all white boxs. There will be 2 update and 1 complete that needs to be checked. Press continue, and again. You may get error. ignore it. Otherwise, press End.
6.Restart your PC once more manually.

Virtual dj 7 pro cracked free download. Free Download Atomix Virtual DJ 7 Pro Full Version wih Serial, crack, keygen and Patch. Virtual DJ Pro is a software used for mixing sounds/music. Virtual DJ 7 consists of a set of audio tools, effects and widgets designed specifically for Disco Jockey’s. Direct Download Link. 19-Nov-2019 - Virtual DJ Pro 7.0.5 Free Download with Crack Full Version. With Virtual DJ users still patiently awaiting Virtual DJ today Atomix released. Virtual DJ Pro 7.0.5 And Crack Download Free. By ibYU5 Elevyn on Aug. Download virtual dj 7 full pro setup for free. Multimedia tools downloads - VirtualDJ PRO Full by Atomix Productions and many more programs are available for instant and free download. Download Atomix Virtual DJ Pro 7 Portable with Keygen Crack Serial Number License Product Key Activation Code for FREE! Featured Atomix Virtual DJ Pro v7.4.453 Portable with Crack Full Version Download.

Phase 3
1.Goto Windows(C/03_Step_3/INSTALL and right click on Instprog. Set it up to run in compatibility mode as mentioned in Phase1, step 3. Then double-click to launch.
2.Press OK if prompted. Select Enlgish then press weiter.
3.Press continue and continue again. Ensure destination is under C:
4. Press continue. Select BMW Group Rectification programs UK. (NOT USA) Press continue.
5.Under INPA 5.0.1, check off Update. Under NCS Expert 3.0.8, check off Complete. Press continue.
6.Click on Rename. In the box, type the number 1 and press continue, and again. You might gett error. Ignore it. IF prompted, press End.

Phase 4
1.Plug in your K+DCAN cable. You will from now on use ONLY that port.
**Windows 10 will autoatically update the driver IF needed. Windows 10 also already has a serial function. This is all we need to modify.**
2.In your search box (lower left of screen next to Windows button), type “Device Manager”. Click on the top option.
3.Once in Device Manager, locate Ports(COM & LPT) and click on the little plus sign next to it. It should now show USB Serial Port (COMx) under Ports(COM & LPT). **The little ‘x’ is in place of whatever number you have the cable plugged into).
4.Right-click on USB Serial Port (COMx) and click Properties.
5.Goto Port Settings tab. Click Advanced. Change the COM Port Number to COM1.
6.Change Latency Timer from 16 to 1. Press ok. Press ok again. Close Device Manager.
7.Goto Windows(C/Driver_D_CAN_USB and double-click OBDSetup.exe. Press Enter.

Phase 5
1.Go into Control Panel/System/Advanced System Settings/Environment Variables.
2.Ensure that System Variables TMP and TEMP both contain the path C:EDIABASBin.
3.If not, manually add it in. Example: C:WindowsTemp;C:EDIABASBin
4.the ‘;’ is important to seperate paths. Please ensure you put that in there then add in the rest.

Phase 6
1.From Desktop, open INPA folder then open the second INPA folder. Right click on Step_1_Install_BMW_Tools and click Poperties. Goto Compatibilty and run the program in compatibility mode for Windows 7. Also, run as administrator. Click Apply then ok. Doulbe-click to launch.
2.Enusre destination path is C:BMW Tools , if it is not change it to that.
3.Press Install. You will get an error. Press ok.
4.Goto Windows(C/BMW Tools/Programminstallation and right-click on setup.exe. Set it up for compatibility mode as stated in Phase 1

Bmw Dcan Driver Download